- Uncategorized
- 2011: Basic Thermodynamics of Reciprocating Compression
- 2011: Greenhouse Gas Strategies - What Do We Do?
- 2011: Physics-Based Characterization of Lambda Sensor Performance
- 2010: ABB Turbocharging: Newest Solutions for Gas Engines
- 2010: AETC Technology Update- Addressing the Single Point of Failure in NSCR
- 2010: AIR REGULATORY UPDATE: 2010
- 2010: ALTERNATE APPROACH TO TACKLE TURBOCHARGER UPGRADES FOR LOW EMISSIONS RETROFIT ON A LEGACY LARGE BORE, SLOW SPEED ENGINE
- 2010: CARBON MONETIZATION & MANAGEMENT STRATEGIES FOR THE NATURAL GAS INDUSTRY: PREPARING FOR THE IMPACT OF A CARBON CONSTRAINED ENERGY MARKET
- 2010: CASE STUDY OF CAPACITY & POWER COMPRESSION USAGE OPTIMIZATION IN A PIPELINE SYSTEM
- 2010: Centrifugal Compressor Surge Modeling
- 2010: CENTRIFUGAL COMPRESSOR VIBRATIONS CASE STUDY
- 2010: CHARACTERIZATION OF EXHAUST POLLUTANT EMISSIONS FOR DESIGN, IMPLEMENTATION & VALIDATION OF AFTER-TREATMENT SYSTEM EFFECTIVENESS
- 2010: COMBINING TECHNOLOGIES FOR EXTENDING THE OPERATING RANGE OF RECIPROCATING COMPRESSION ASSETS
- 2010: A COMPARATIVE VALIDATION OF SIMULATED COMPRESSOR VALVE PERFORMANCE WITH CLOSED LOOP COMPRESSOR TEST DATA
- 2010: CONNECTING ROD BEARING IMPACT VIBRATIONS IN HIGH SPEED INDUSTRIAL GAS ENGINES USING ACCELERATION VS. CRANK-ANGLE, NON-PHASED VIBRATION TIME WAVEFORMS & FFT SPECTRAL ANALYSIS
- 2010: DATA COLLECTION & ANALYSIS TECHNIQUES FOR EMISSIONS MAPPING
- 2010: DEMYSTIFYING TURBOCHARGER VIBRATION
- 2010: DESIGN CHALLENGES FOR RECIPROCATING COMPRESSORS IN SPECIALTY GAS SERVICES
- 2010: DEVELOPING AN EFFECTIVE APPROACH FOR SIZING RECIPROCATING COMPRESSORS
- 2010: DO IT! DO IT RIGHT! DO IT RIGHT NOW! AND DON’T QUIT! MAINTENANCE!
- 2010: DO YOU WANT TO RETIRE? A BRIEF RETIREMENT PLANNING DISCUSSION
- 2010: Dresser-Rand Revitalizing America’s Compressors
- 2010: DRIVER OPTIONS FOR PIPELINE COMPRESSORS: GAS TURBINE, IC ENGINE & ELECTRIC MOTOR
- 2010: ENGINE COOLING PERFORMANCE OPTIMIZATION
- 2010: Enhanced Field Performance and Reliability Using Caterpillar G3508 Engine Upgrade
- 2010: Extending the Life of Your TEG Dehydration System
- 2010: FIELD DEMONSTRATION OF ADVANCED NSCR CONTROL USING INTEGRATED TECHNOLOGIES
- 2010: FIELD DEMONSTRATION TEST OF INTEGRATED ERLE TECHNOLOGIES
- 2010: Gas Machinery Conference -Technology Update- High Speed – HOFIM
- 2010: GAS TURBINE PACKAGING OPTIONS & FEATURES FOR PIPELINE APPLICATIONS
- 2010: GMC 2010 Tech Update: Next Generation Clean Burn Package for Cooper Bessemer Engines
- 2010: GMC 2010 Tech Update: Next Generation Clean Burn Package for Cooper Bessemer Engines
- 2010: HEAVY OR SOUR POOR QUALITY FUEL GAS? MAXIMIZE UPTIME USING SIMPLE MEMBRANE PROCESS FOR HEAVY & ACID GAS REMOVAL FROM FUEL
- 2010: HIGH BTU FUEL GAS FROM THE MARCELLUS SHALE & HOW IT AFFECTS EMISSIONS & PEAK FIRING PRESSURES
- 2010: HUMAN ERROR REDUCTION: TRAPS, CONSEQUENCES & TOOLS
- 2010: IDENTIFYING & MITIGATING FLOW-INDUCED VIBRATION IN RECYCLE LOOP GAS PIPING AT A CENTRIFUGAL COMPRESSOR STATION
- 2010: IMPROVING ENGINE RELIABILITY & FUEL ECONOMY THROUGH MEDIUM PRESSURE FUEL INJECTION & ION SENSE BALANCING: A CASE STUDY
- 2010: IMPROVING RECIPROCATING COMPRESSOR RELIABILITY AT SUNCOR COMMERCE CITY
- 2010: THE INFLUENCE OF HIGH ROTATIONAL SPEED ON THE HYDRODYNAMIC BEHAVIOUR OF RECIPROCATING COMPRESSOR BEARING
- 2010: KNOWING PEAK PRESSURE WITHOUT PRESSURE SENSOR
- 2010: LARGE MEDIUM-SPEED RECIPROCATING HORSEPOWER IN PIPELINE APPLICATIONS
- 2010: LOW-LOSS PULSATION CONTROL: A CASE STUDY OF THE PRESSURE RECOVERY INSERT (PRI) NOZZLE
- 2010: MECHANICAL & ELECTRICAL CHALLENGES OF LARGE INDUCTION MOTORS DRIVING RECIPROCATING COMPRESSORS WITH THREE YEARS SERVICE
- 2010: New Alternatives for Reciprocating Compressor End Deactivation And Step-less Control
- 2010: NEW TECHNOLOGY ELECTRONIC IGNITION WHICH ELIMINATES THE LIMITATIONS OF TRADITIONAL IGNITION SYSTEMS
- 2010: Next generation compressor sealing technology: The BCD packing ring
- 2010: OPERATING COMPANY EXPERIENCE WITH ELECTRONIC PRE-COMBUSTION CHAMBER CHECK VALVES: A CASE STUDY
- 2010: PARAMETRIC EMISSION MONITORING SYSTEM OF DRY-LOW NOX NATURAL GAS FIRED TURBINES
- 2010: PHYSICS-BASED CHARACTERIZATION OF NSCR OPERATION-PART 1
- 2010: PREPARATION FOR FUGITIVE EMISSIONS RULINGS 2011: STRATEGIES FOR COMPLIANCE
- 2010: PRINCIPLES OF BUSINESS ETHICS FOR THE GAS COMPRESSION INDUSTRY
- 2010: Put Pipeline Equipment and Diagnostics Data on Every Desktop in Your Organization using the PI Infrastructure from OSIsoft
- 2010: Reciprocating Gas Engine: The Clean Reliable Workhorse
- 2010: RESOLVING COMMON VIBRATION PROBLEMS ON RECIPROCATING COMPRESSORS
- 2010: REWHEELING CENTRIFUGAL COMPRESSORS: DESIGN CONSIDERATIONS & FIELD APPLICATION
- 2010: SELECTION, INSTALLATION & OPERATION OF GAS TURBINE INLET AIR FILTRATION SYSTEMS
- 2010: THREADS & SUCH
- 2010: UNDERSTANDING CAST IRON & REPAIRING DAMAGED CASTINGS PERMANENTLY
- 2010: UNDERSTANDING ROD REVERSAL IN RECIPROCATING COMPRESSORS
- 2010: USE OF OIL-FLOODED SINGLE SCREW COMPRESSOR FOR HYDROGEN & OTHER GASES IN A 75000 BPD REFINERY: PACKAGE DESIGNS, BEARING TECHNOLOGY & PRACTICAL EXPERIENCES
- 2010: VIBRATION CONTROL IN RECIPROCATING COMPRESSOR SYSTEMS
- 2010: Voith TurboCool VSD Fluid Coupling For Natural Gas Compressor Cooling Fan Drives
- 2009: ABB Products & Technology -
- 2009: ABCs of Hiring & Retaining Generation X&Y Employees
- 2009: ACTT/GMRCSoftware Update
- 2009: Air Regulatory Update
- 2009: Art & Science of Reciprocating Machinery Analysis
- 2009: Assessment of Dynamic Pressure Losses in Reciprocating Compression Plants
- 2009: Basic Thermodynamics of Reciprocating Compression
- 2009: Carbon Consciousness & The Need for Environmental Intelligence: Benchmarking the Body of Evidence Used to Support Pending Climate Change Legislation in the United States
- 2009: Case Studies Highlighting the Importance of the Design Phase in Compressor Packaging
- 2009: Comparative Study of Air Flow Measurement Techniques & How They Compare to Lab Tested Results
- 2009: Continued Application of Advanced Balancing Techniques for the Main & Pre-Combustion Chamber of Pipeline Engines
- 2009: Development of an Autobalance System for Legacy Slow-Speed Integral Engines
- 2009: Diagnostic Monitoring & On Board Diagnostics for Engine-Compressors: Needs & Opportunities
- 2009: Dresser-Rand Mini-SIP, Low-Volume Screw-In Precombustion Chamber
- 2009: Dry Gas Seal Retrofits
- 2009: Efficient Bottle-Less Compressor Pulsation Control: Experimental Test Results
- 2009: EFRC Guidelines for Vibrations in Reciprocating Compressor Systems
- 2009: Engine Modeling & Simulation to Correct Operational Issues with a Lean Burn Two-Stroke Engine
- 2009: EPC 50 Small Engine Air Fuel Ratio Controller
- 2009: Equipment Analysis & Pattern Interpretation for Non-Equipment Analysts
- 2009: Exhaust Gas Aftertreatment (Catalyst Systems)
- 2009: Exhaust Manifold Design Optimization for Cylinder Scavenging & Turbocharger Performance
- 2009: Exhaust NO2/NOx Ratio from Lean-Burn Natural Gas Engines
- 2009: Experimental Assessment of the G8.3E Engine & Catalyst Emissions Performance
- 2009: Fluid Dynamic Analysis of Reciprocating Compressor Valves to Assess Its Aerodynamic Performance
- 2009: Full-Scale Benchmark Testing of Centrifugal Compressor Surge
- 2009: G3516B with Ultra Lean Burn Technology Contract Gas Compression Fleet Experience
- 2009: Gas Turbine Performance & Maintenance
- 2009: High Efficient Pipeline Compressor Packages
- 2009: High Pressure Pipeline Applications
- 2009: Hoerbiger Electronic Fuel Control System (EFC)
- 2009: Improved Performance of an Existing Pipeline Compressor Station
- 2009: Increased Efficiency of a Poppet Style Valve for High Speed
- 2009: Investigation of High Efficiency Pulsation Filter Bottle Design
- 2009: Investigation of the Performance of a Re-Aeroed Turbocharger on Unit 9A at El Paso’s Station 32 & The Development of a Predictive Waste Gate Model
- 2009: Long-Term Emissions Performance of Stationary Natural Gas Engines Equipped with NSCR System
- 2009: Motor Rotor Design & Life Evaluation Using Hybrid of Finite Element & Torsional Vibration Analyses
- 2009: A New Valve Simulation Tool Using CFD for Valve Parameter Characterization
- 2009: Oil Stiction in Compressor Valves: Modeling & Mitigation
- 2009: Operation & Selection of Electric Motor Driven Stations
- 2009: Performance Control of Reciprocating Compressors: Devices for Managing Load & Flow
- 2009: Physical Asset Management: Implement a Proactive Maintenance Strategy to Prevent Unexpected Failures
- 2009: Piezoelectric Sensors for Combustion Pressure Based Control Systems for Large Gas Engines
- 2009: Quantification of Liquid Entrainment in Compressor Suction Streams
- 2009: Reciprocating Compressor Field Testing & Troubleshooting: Performance, Pulsation & Vibration
- 2009: Reciprocating Compressor Performance Analysis Using the PV Card Method
- 2009: Reciprocating Compressor Performance Improvements with Radial Poppet Valves
- 2009: Recommended Approach to Control Vibration from Cylinder Gas Forces
- 2009: Reducing Compressor Maintenance Costs by Leveraging Remote Runtime Monitoring
- 2009: Reducing the Risk of Vapor Cloud Fires & Explosions
- 2009: Resolving Common Vibration Problems on Reciprocating Compressors
- 2009: Saving Fuel in Large-Bore Natural Gas Engines Using Cylinder-by-Cylinder Electronic Fuel Control: A Case Study
- 2009: Software Updates for the 2516A2 Engine Peak Meter/Difficult Sensor Installations in PCCs
- 2009: TCR, The Cutting Edge/TCA, The Benchmark
- 2009: Turbocharging for Optimized Performance
- 2009: TurboShield: Turbocharger Management System for Informed Designs
- 2009: Unloading Capabilities of the Dresser-Rand DDV Pipeline Cylinder
- 2009: Update on Caterpillar’s G3500 & GCM Engine
- 2009: Watching Expenses? Avoid Costly Shutdowns, Be Proactive and Insure Torque Tool Accuracy
- 2008: 2008 Air Quality Regulatory Update
- 2008: Analysis & Application of Advanced Balancing Techniques for PCC Fitted Pipeline Engines
- 2008: Analysis of High-Speed Engine Valve Vibrations Using Statistical Methods
- 2008: Assessment of Knock Characteristics of Alternative Gas Fuels through Methane Number Measurement
- 2008: Automation Upgrades for Compressor Engines
- 2008: Basic Engine & Compressor Analysis
- 2008: Basic Introduction to Spark Plugs & New Spark Plug Technology
- 2008: Basic Thermodynamics of Reciprocating Compression
- 2008: Benefits of the Virtual Orifice: Pulsations & Vibrations Reduced, Performance Improved
- 2008: Can You Hear Me Now? Compressor Station Noise: What Is It, Where Is It & How Do I Deal With It?
- 2008: Characterization of NSCR Performance on Four Stroke Natural Gas-Fueled Rich Burn Engines
- 2008: Combustion Sensing in Pre-Combustion Chambers Using Ion Sense
- 2008: Compressed Air Systems for Natural Gas Compressor Stations
- 2008: Compressor Design for Pulsation & Vibration Control
- 2008: Compressor Package Design Optimization
- 2008: The Cost of Lost Gas
- 2008: Delivering Asset Reliability, Increased Throughput & Reduced O&M Costs with an Enterprise Infrastructure for Managing Time-Series Data & Events: A MichCon Case Study
- 2008: Demonstration of Efficient Pulsation Control Using Tuned Loop Networks – GMRC Research Review
- 2008: Development of a Surge Control Guideline & Surge Testing Considerations
- 2008: Downtime Reduction on Reciprocating Compressors with Heat-Free Hub Design
- 2008: The Dynamics of Reciprocating Compressor Valve Springs
- 2008: The Effect of Compressor Cylinder Design on Nozzle Pulsations: Field Test Results of the Dresser - Rand DDV Pipeline Cylinder
- 2008: Effects of Environmental Factors & Aging on the Emissions Performance of Stoichiometric Natural Gas Engines with Three-Way Catalysts
- 2008: eMAX mini Poppet Valves
- 2008: Empirical Compressor Performance Maps for High-Speed Multi-Stage Compressors
- 2008: Evaluation of KTA19-GC Engine Performance on Low-BTU Gas
- 2008: EZ Rail
- 2008: Gas Turbine & Centrifugal Compressor Field Test Software Development
- 2008: How a Centrifugal Compressor Works
- 2008: A Method for an Alternative Flow Measurement in a Centrifugal Compressor
- 2008: A New Compressor Valve
- 2008: New Products
- 2008: New Solutions for Trubocompressor Machinery Availability Improvement
- 2008: New Technologies for Fuel Economy & Emission Reduction in SI Engines
- 2008: Operating Characteristics of an NSCR Catalyst on an 80 kW Cummins-Onan Genset
- 2008: The Parabolic Burning Curve Explained
- 2008: Performance Control of Reciprocating Compressors: Devices for Managing Load & Flow
- 2008: Permanent Magnet Synchronous Motor Technology & Its Advantages Over Conventional Motor Drive Solutions
- 2008: The Physics of Pulsations in Reciprocating Compressor Stations
- 2008: Pre-Detonation, Natural Gas Engines that Act Like Diesels
- 2008: Precombustion Chamber Design for Low NOx Emissions from Large Bore NG Engines
- 2008: Predicting Engine Pressure-Time Patterns
- 2008: Pulsation & Vibration Control Strategies to Meet the New 5th Edition of API 618
- 2008: Redesign of the Superior CleanBurn 825 Prechamber & Performance Gains
- 2008: Reducing the Total Cost of Ownership of Natural Gas Engines
- 2008: Reducing the Total Cost of Ownership of Natural Gas Engines
- 2008: Specifying, Operating & Troubleshooting Separators
- 2008: Suggestions for Career Enhancement
- 2008: System Performance Affected by Dynamic Pressure Drop
- 2008: Testing of a Semi-Active Valve for Reciprocating Compressors
- 2008: Three-Dimensional Vibration Absorber to Eliminate High Vibrations in Pipelines
- 2008: Using Infrared Thermography to Identify & Account for L&U
- 2008: Using WebMap Software
- 2008: Validation and Laboratory Testing of an Active Air Control System to Reduce Overall Engine Emissions in Two-Stroke Cycle Engines
- 2008: Waste Heat Recovery for Pipeline Compressor Stations
- 2007: Advancements in Pulsation Control Technology
- 2007: Advances in Fundamental Understanding of the Dynamic Sealing Action in Packing Systems
- 2007: The Advantages of Modern Slow Speed Compressors for the Gas Transmission and Gas Storage Market
- 2007: Air Regulatory Update
- 2007: Analysis of a Variable Geometry Diffuser Turbocharger to Increase Engine Operating Flexibility
- 2007: Analysis of High-Speed Engine Valve Vibrations Using Statistical Methods
- 2007: Analysis of Large Bore Gas Engine Instability by the Use of Pressure Sensors in the Cylinder and Manifold
- 2007: Application of On-Line Acceleration & Cylinder Pressure Measurements
- 2007: Applying Asset Management Measurement Techniques in a Natural Gas Transmission Compressor Station
- 2007: An Automation Method for Optimizing & Controlling a Reciprocating Compressor Using Load Step, Speed & Suction Pressure Control
- 2007: Basic Thermodynamics of Reciprocating Compression
- 2007: Compressor Station Risk Reliability & Failure Mode Analysis
- 2007: Customer Driven Upgrades to the Engine Peak Meter
- 2007: Designing & Operating Compressor Stations When Fuel Costs are $5 to $10
- 2007: Detection of Excess Emission Conditions for Rich Burn Engines Equipped with NSCR Reduction Systems
- 2007: Development of a Transient Fluid Dynamic Solver for Compression System Pulsation Analysis
- 2007: Development of a Turbocharger Booster System
- 2007: Development of an Equation to Predict Flow Through Reciprocating Compressors
- 2007: Development of the Charge Air Integrated Manifold Engine Numerical (CAIMENS) for Active Air Control System Implementation
- 2007: Dilution Effects of Gasses on Lubricating Oil in a Recip Compressor
- 2007: Emission Reduction & Stability Improvement by Predictive Model Based Control of Legacy Gas Engines
- 2007: Equivalence Ratio Modeling Techniques for Air Fuel Ratio Control
- 2007: Exhaust Gas Aftertreatment (Catalyst Systems)
- 2007: Gas Turbine Performance & Maintenance
- 2007: High Speed Permanent Magnet Motors
- 2007: Hoerbiger Engineering Services 2007 GMC Tech Update
- 2007: IMPactt Training Update
- 2007: The Importance of Proper Air Distribution in Two-Stroke Integral Engines
- 2007: The Influence of Clean Air Compliance on Engine Performance Parameters
- 2007: Integrating Compressor Performance with the Effects of Pressure Pulsation Across a Unit’s Entire Operating Map
- 2007: Introduction to Rotary Screw Compressors
- 2007: An Investigation of the Application of Finite Amplitude Wave Tuning Technology for Controlling Reciprocating Compressor Pulsations
- 2007: Know What You Are Really Buying
- 2007: Material Design for Valve Applications
- 2007: Mobil Pegasus 1005 The Next Generation Gas Engine Oil
- 2007: One Compressor OEM May Not Have the Optimum Equipment Selection
- 2007: Performance Through Leadership
- 2007: The Perpetual Motion Machine…
- 2007: Portable Emission Testing Performance & Operating Procedures
- 2007: Power Cylinder Performance
- 2007: PRCI’s Emissions Control for Legacy Engines Roadmap
- 2007: Reducing Emissions of a Large Bore Two-Stroke Engine Using a Natural Gas & Hydrogen Mixture
- 2007: Revisiting Torsional Stiffness of Flexible Disc Couplings
- 2007: Safety & Prevention of Costly Undetected, Developing Failures in Crank & Crosshead Bearings of Gas & Process Compressors
- 2007: Siemens Pipeline Compressor
- 2007: Standardizing Compressor Station Automation
- 2007: Technology Update GMC 2007
- 2007: Test & Evaluation of a Continuous Combustion Pressure Monitoring System for High-Speed Four-Stroke Engines
- 2007: Thermo Chemical Recuperation (TCR) for Fuel Savings & Emissions Reduction at Compressor Engines
- 2007: Torsional & Pulsation Design Audits
- 2007: Turbocharger Design & Performance Analysis
- 2007: Uncertainty Considerations for Reciprocating Compressor Performance Testing
- 2007: Use of Oil-Flooded Screw Compressors with Rolling Bearings Under Severe Sour Gas Conditions: The Bearing Technology & The Reference Installation
- 2007: Variable Speed Planetary Gears for High Power Requirements
- 2007: Waukesha ATGL Engine Controls Upgrade
- 2006: ACTT-GMRC Training Initiatives
- 2006: Air Regulatory Update
- 2006: ARCT & GMRC Pulsation Control Project
- 2006: Assessing the Impact of Pressure Pulses in Exhaust Manifolds During Blowdown Process on In-Cylinder Distribution using T-RECS
- 2006: Basic Thermodynamics of Reciprocating Compression
- 2006: Case Study of the Installation & Performance of a Large Horsepower, High-Speed, Gas Engine Driven, Separable Compressor at AGL Jefferson Island
- 2006: A Comparative Study of Performance & Efficiency of High-Speed Compressor Valves
- 2006: Compressor Cylinder Lubrication Systems: Design, Components, Operation & Reliability
- 2006: Cycle-by-Cycle Combustion monitoring
- 2006: Development & Field Verification Testing of an Oxidizing Converter & a Compatible Lube Oil for Two-Stroke, Lean-Burn Gas Engines
- 2006: Development of a Guideline for Field Testing of Gas Turbines & Centrifugal Compressors
- 2006: Development of an Internal Direct Surge Control
- 2006: Development of the New Large Bore Ajax Engine
- 2006: Effective Use of Expansion Joints in Gas Transmission Systems
- 2006: Electronic Pre-Combustion Chamber
- 2006: Emissions Reduction & Horsepower Re-Rate: A Case Study
- 2006: Engineered Approach to Reach Emissions Targets on a Worthington LTC Engine
- 2006: Gas Pipeline Black Powder: Who Should Know or Care?
- 2006: Historical Overview of the Gas Compression Infrastructure in the United States: Current Challenges & How We Got There
- 2006: The HOS Pipeline Cylinder
- 2006: Impact of the Mounting Design on Temperature Exposure of Combustion Pressure Sensors on Large Bore Gas Engines
- 2006: Impurities in the Gas Stream
- 2006: Inertia Unbalanced Forces & Couples
- 2006: Interstage Pressure Calculation Derivation
- 2006: Investigation of Engine Air Balance
- 2006: Knock Characterization Using Ionization Detection
- 2006: Measure Seven Times, Cut Once: A Systematic Method of Troubleshooting Engine & Compressor Problems
- 2006: Mounting Separable Compressors for Pipeline Service
- 2006: New Developments in the Application of Online Reciprocating Engine & Compressor Pressure Monitoring Systems
- 2006: New Hand-Held Peak Meter
- 2006: New Products and Tools
- 2006: Optimizing Compressor Design for Complex Reciprocating Compressor Installations
- 2006: Performance Control of Reciprocating Compressors: Devices for Managing Load & Flow
- 2006: Performance Improvement to Existing Air-Cooled Heat Exchangers
- 2006: Pipeline Compressor Packing Leakage
- 2006: The Pressure Pick-Up a compressor cylinder retrofit
- 2006: Reciprocating Compressor Performance Measurement & Condition Analysis
- 2006: Reciprocating Compressor Performance: Seeing the Big Picture
- 2006: Review of Greenhouse Gas Programs, Policies & Legislation
- 2006: Shock Monitoring Technology for Reciprocating Machinery
- 2006: Single-shaft turbocompressors for Boil Off Gas (BOG) recovery at LNG re-gasification terminals
- 2006: Suggestions for Career Enhancement
- 2006: The Surprising Influence of Bearing (and Compressor Drive) Type on Compressor Station Economics: How Certain New Technologies Provide Significant Life Cycle Cost Advantages & Represent a Strategic (Real) Option
- 2006: Turbine Inlet Ice Related Failures & Predicting Inlet Ice Formation
- 2006: Understanding & Applying Ion Sense for the Detection of Misfire, Detonation & Combustion Instability & for Engine Balance
- 2006: Universal Efficiency Definition for Reciprocating & Centrifugal Compressors
- 2006: The Value of Compressor Efficiency
- 2006: Visible Flame Imaging of Pre-chamber Combustion in a Large Bore Natural Gas Engine
- 2006: Who Moved My Knowledge?
- 2006: Working Sideways: Using Emissions Modeling & Controls to Solve Operational Problems (A Case Study)
- Acoustics
- 2005: Acoustical Modeling of Reciprocating Compressors with Stepless Valve Unloaders
- 2005: Integrated Design Approach for Reciprocating Compressor Installation
- Air/Fuel Ratio
- 2005: Alternative Methods of Engine Balance Based on In-Cylinder Determination of Air/Fuel Ratio
- Analysis
- 2005: Basic Engine & Compressor Analysis Techniques
- 2005: A Missing Reading, A Surrogate Analysis Tool & A Paradigm for Emission Reductions
- 2004: Basic Engine & Compressor Analysis Techniques
- 2004: Integrated Design Approach for Reciprocating Compressor Installation
- API 616
- 2011: Changes in the New 5th Edition of API 616 Specs
- API 618
- 2004: Understanding the Pulsation & Vibration Control Concepts in the New API 618 (Fifth Edition)
- API Specifications
- 2005: API Specifications Review for Gas Turbine Driven Turbocompressors
- Balance
- 2005: Alternative Methods of Engine Balance Based on In-Cylinder Determination of Air/Fuel Ratio
- 2005: Balancing Large Bore Gas Engines & Factors Affecting Balance
- 2005: Controlling Engine Air Balance through Manifold Design
- Basic Thermodynamics of Reciprocating Compression
- 2006: Basic Thermodynamics of Reciprocating Compression
- Catalysts
- 2011: Aged Oxygen Sensor Performance and Deterioration In Stoichiometric Engines Operating with Three-way Catalyst
- 2004: Development & Testing of a Catalytic Converter for the Reduction of CO and H2CO Emissions from a Two-Stroke Lean Burn Gas Engine
- 2004: How Can I Design an NSCR System That Will Work and How Can I Confirm It?
- Centrifugal Compressors
- 2005: Non-OEM Re-Rate of Centrifugal Compressor: Methods & Results
- 2005: Optimizing Peak Efficiency & Flow Range in Pipeline Centrifugal Stages
- 2005: Surge Protection in Centrifugal Compressor Systems
- Combustion
- 2005: Influence of Sensor Installation on Performance of Combustion Pressure Sensors
- Compression
- 2011: Economic Evaluation Model for Various Drivers and Driven Equipment Technologies in Gas Compression Applications
- 2004: Basic Thermodynamics of Reciprocating Compression
- Compressor Sizing
- 2005: Reciprocating Compressor Sizing & Evaluation
- 2004: The Ins & Outs of Sizing a Reciprocating Compressor
- Computational Fluid Dynamics
- 2005: Analysis of Exhaust Silencer Stack Using CFD
- Contaminants
- 2004: Advanced Compressor Engine Controls to Enhance Operation, Reliability and Integrity
- 2004: Continuous Pressure Monitoring Based Control Systems for Gas Engines
- 2004: Deploying Next Generation Two-Stroke Cycle Pipeline Engine Controls Today: A Case Study
- 2004: The Intelligent Engine: The Core Building Block for the Intelligent Pipeline
- 2004: Transient Gas Flow & Control System Modeling for the Design of Compressor Surge Control Systems for Trips & Upsets
- Data Interpretation
- 2005: Compressor Operations Management Expert Tool with Sarbanes Oxley Compliance
- Design
- 2005: Integrated Design Approach for Reciprocating Compressor Installation
- 2004: Compressor Station Ancillary Equipment: Know What You Are Buying, Part I
- 2004: Integrated Design Approach for Reciprocating Compressor Installation
- 2004: Vibration & Performance Design Considerations for Multi-Unit Reciprocating Compressor Gas Storage Facilities
- Efficiency
- 2005: Advanced Reciprocating Compression Technology (ARCT)
- 2005: Compressor Efficiency Is Worth How Much?
- 2005: Optimizing Peak Efficiency & Flow Range in Pipeline Centrifugal Stages
- 2004: Mixing & Combustion Investigations in a Large Bore Optical Engine
- 2004: Optimized Compressor Efficiency & Performance Through Thermography
- 2004: Reduced Operational Costs via Effective On-Site Storm Water Treatment
- Electric Motor Drives
- 2005: Electric Motor Conversion of 2-Stroke & 4-Stroke Integral Engines
- 2004: Electric Motor Driven Compressors: Basic Principles & Operation
- 2004: IEMDC – In-Line Electric Motor Driven Compressor
- Emissions
- 2011: Aged Oxygen Sensor Performance and Deterioration In Stoichiometric Engines Operating with Three-way Catalyst
- 2006: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
- 2006: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
- 2005: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
- 2005: Air Regulatory Update
- 2005: Closed-Loop Control of NOX Emissions in a Two-Stroke Integral Compressor Engine – Part II
- 2005: Considering the Options: Making the Most of Emissions Reduction Requirements
- 2005: Cost Effective NOx Emission Retrofit Control Technologies
- 2005: Emissions Compliance Monitoring Options for Mid-Range Industrial Gas Turbines
- 2005: A Missing Reading, A Surrogate Analysis Tool & A Paradigm for Emission Reductions
- 2005: A Novel Approach to Modeling & Demonstrating Significant NOx Emissions Reductions on Large Bore Stationary Engines Fueled by Multiple Gas Types
- 2004: Development & Testing of a Catalytic Converter for the Reduction of CO and H2CO Emissions from a Two-Stroke Lean Burn Gas Engine
- 2004: Development & Testing of an Expansion Chamber for the Reduction of NOx Emissions in a Two-Stroke Lean Burn Gas Engine
- 2004: Development of an FTIR Continuous Emission Monitor (CEM) for Accurate Engine & Turbine Emission Monitoring
- 2004: How Can I Design an NSCR System That Will Work and How Can I Confirm It?
- 2004: Meeting Regulatory Challenges through Advances in Gas Turbine Emissions Control
- 2004: Methodology & Investigation for Determining Start-Up Emissions From Gas Compressor Engines
- 2004: Mixing & Combustion Investigations in a Large Bore Optical Engine
- 2004: Modeling & Parametric Studies of NOx Production in Natural Gas Fired Turbines with Lean Premixed Combustors
- 2004: New Air Regulations Impacting the Natural Gas Industry
- 2004: Using Normalized Parameters to Model & Design for the Effects of Scavenging and Trapping on Emissions Performance
- Engine Frame
- 2004: The Contribution of Base Movement in Large Integral Compressors to Frame Cracks
- Equipment
- 2005: Compressor Station Ancillary Equipment: Know What You Are Buying - Part 2
- 2004: Compressor Station Ancillary Equipment: Know What You Are Buying, Part I
- Exhaust
- 2005: Analysis of Exhaust Silencer Stack Using CFD
- 2005: Predicting Exhaust Gas Temperatures for Lean Burn Two-Stroke Engines
- Exhaust Systems
- 2005: Compressor Station Ancillary Equipment: Know What You Are Buying - Part 2
- Failures
- 2004: Advanced Empirical Modeling Software Provides Early Warning of Gas Compression Machinery Failure
- 2004: Case Study: The Revamp of Four 7,000 HP Reciprocating Compressors
- 2004: Failure Investigation of Large Mainline Compression Equipment: Conclusions of Several Investigations
- Flow
- 2005: Optimizing Peak Efficiency & Flow Range in Pipeline Centrifugal Stages
- 2004: Calculating Reliable Impact Velocity by Mapping Instantaneous Flow in a Reciprocating Compressor
- 2004: Transient Gas Flow & Control System Modeling for the Design of Compressor Surge Control Systems for Trips & Upsets
- Foundations
- 2004: Design Case Study: Foundation for an 8100 HP High-Speed Reciprocating Compressor
- 2004: Grouting Large Skid Mounted Compressor Units
- Frames
- 2004: The Contribution of Base Movement in Large Integral Compressors to Frame Cracks
- Fuel
- 2004: Gas Turbine Fuel Considerations
- Fuel Control
- 2004: Fuel Consumption Minimization Under Non-Isothermal Condition at Compressor Stations
- Grouting
- 2004: Grouting Large Skid Mounted Compressor Units
- High Pressure Fuel Injection
- 2005: HPFiTM Retrofit Installation Package for Miller Cycle Derivative Large Bore Engines
- Horsepower
- 2004: Enhancing Operation of the Existing Natural Gas Compression Infrastructure: Phase I
- Horsepower Replacement
- 2005: Don’t Retire … ReHire! The Installation of Remanufactured Integral Slow Speed Engines for Horsepower Replacement
- Ignition
- 2005: Development of an Open Path Laser Ignition System for a Large Bore Natural Gas Engine
- 2005: Field Application of Micro-Liter Diesel Pilot Ignition to a Worthington SUTC Large Bore Natural Gas Engine
- Infrastructure
- 2005: Advanced Reciprocating Compression Technology (ARCT)
- 2005: Technologies to Enhance Operation of the Existing Natural Gas Compression Infrastructure
- 2004: Enhancing Operation of the Existing Natural Gas Compression Infrastructure: Phase I
- Intake Systems
- 2005: Compressor Station Ancillary Equipment: Know What You Are Buying - Part 2
- Integrity
- 2004: Advanced Compressor Engine Controls to Enhance Operation, Reliability and Integrity
- Laser
- 2004: Laser Spark Ignition for Natural Gas Fueled Reciprocating Engines
- Load
- 2005: Performance Control of Reciprocating Compressors: Devices for Managing Load & Flow
- Lubricants
- 2004: Overview of Compressor Lubricants & Compressor Lubrication
- Lubrication
- 2004: Overview of Compressor Lubricants & Compressor Lubrication
- MACT
- 2006: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
- 2006: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
- 2005: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
- Manifolds
- 2005: Controlling Engine Air Balance through Manifold Design
- Mirco-Pilot Ignition Systems
- 2004: Improvement to Pipeline Compressor Engine Reliability through Retrofit Micro-Pilot Ignition
- Modeling
- 2005: Acoustical Modeling of Reciprocating Compressors with Stepless Valve Unloaders
- 2004: Compressor Station Optimization Using Simulation-Based Optimization
- 2004: Continuous Pressure Monitoring Based Control Systems for Gas Engines
- 2004: Modeling & Parametric Studies of NOx Production in Natural Gas Fired Turbines with Lean Premixed Combustors
- Monitoring
- 2004: Development of an FTIR Continuous Emission Monitor (CEM) for Accurate Engine & Turbine Emission Monitoring
- Noise
- 2005: Noise Reduction of a Multi-Stage Export/Reinjection Centrifugal Compressor Through the Use of Duct Resonator Arrays
- Nox
- 2005: Closed-Loop Control of NOX Emissions in a Two-Stroke Integral Compressor Engine – Part II
- 2005: Cost Effective NOx Emission Retrofit Control Technologies
- 2004: Development & Testing of a Catalytic Converter for the Reduction of CO and H2CO Emissions from a Two-Stroke Lean Burn Gas Engine
- 2004: Modeling & Parametric Studies of NOx Production in Natural Gas Fired Turbines with Lean Premixed Combustors
- NSCR Systems
- 2004: How Can I Design an NSCR System That Will Work and How Can I Confirm It?
- Oil
- 2005: A Missing Reading, A Surrogate Analysis Tool & A Paradigm for Emission Reductions
- Operations
- 2005: Compressor Operations Management Expert Tool with Sarbanes Oxley Compliance
- Optimization
- 2004: Compressor Station Ancillary Equipment: Know What You Are Buying, Part I
- Performance
- 2005: A Missing Reading, A Surrogate Analysis Tool & A Paradigm for Emission Reductions
- 2005: Performance Control of Reciprocating Compressors: Devices for Managing Load & Flow
- 2004: Case Study of the Performance of Large Horsepower Four Stroke Lean Burn Engine Drives Used in TGP Horsepower Replacement Project
- 2004: Numerical & Experimental Investigation of Performance Losses in a Clark Turbocharger Compressor
- 2004: Optimized Compressor Efficiency & Performance Through Thermography
- 2004: Vibration & Performance Design Considerations for Multi-Unit Reciprocating Compressor Gas Storage Facilities
- Piping Systems
- 2005: Integrated Design Approach for Reciprocating Compressor Installation
- Pressure Monitoring
- 2004: Continuous Pressure Monitoring Based Control Systems for Gas Engines
- Pulsation
- 2005: Introduction to Vibration & Pulsation in Reciprocating Compressors
- 2005: Recip Pulsation Vibration Troubleshooting: A Practical Approach
- 2004: Understanding the Pulsation & Vibration Control Concepts in the New API 618 (Fifth Edition)
- Reciprocating Compressors
- 2005: Basic Thermodynamics of Reciprocating Compression
- 2005: Integrated Design Approach for Reciprocating Compressor Installation
- Reliability
- 2005: Advanced Reciprocating Compression Technology (ARCT)
- 2005: Virtual Pipeline System Testbed for Non-Thermal Transient Simulation
- 2004: Advanced Compressor Engine Controls to Enhance Operation, Reliability and Integrity
- 2004: Case Study of the Performance of Large Horsepower Four Stroke Lean Burn Engine Drives Used in TGP Horsepower Replacement Project
- 2004: Case Study: The Revamp of Four 7,000 HP Reciprocating Compressors
- 2004: Getting Reliability Through Better Practices on Old Recips
- 2004: Improvement to Pipeline Compressor Engine Reliability through Retrofit Micro-Pilot Ignition
- 2004: Turbocharger Reliability Issues on Caterpillar G3600 Series Engines
- Rider Bands
- 2005: Solid Rider Bands: Considerations for Installation
- Rod Load
- 2005: Rodloads, Frameloads, Flangeloads, Gasloads, Pinloads: A Discussion of the Various Allowable Loads Used to Rate Reciprocating Compressors
- 2004: Enhancing Operation of the Existing Natural Gas Compression Infrastructure: Phase I
- 2004: Field Experience with Rod Load Monitor
- Rotor Dynamics
- 2005: A Physical Interpretation of the Principles & Application of Rotor Dynamics
- 2004: A Physical Interpretation of the Principles & Application of Rotor Dynamics
- Scavenging
- 2004: Using Normalized Parameters to Model & Design for the Effects of Scavenging and Trapping on Emissions Performance
- Selective Catalytic Reduction (SCR)
- 2011: Challenges in Retrofitting Selective Catalytic Reduction (SCR) Systems to Existing Stationary Natural Gas Fired Engines
- Sensors
- 2005: Influence of Sensor Installation on Performance of Combustion Pressure Sensors
- Separators
- 2004: Fundamentals of Gas Solid/Liquid Separation
- Speed
- 2004: Speed Variation: A Study on Torque Made and Consumed
- Starting System
- 2005: Development & Field Testing of Air-In-Head Starting System
- Stepless Valve Unloaders
- 2005: Acoustical Modeling of Reciprocating Compressors with Stepless Valve Unloaders
- Storm Water
- 2004: Reduced Operational Costs via Effective On-Site Storm Water Treatment
- Strategic Sourcing
- 2004: Introduction to Strategic Sourcing
- Surge Control
- 2008: Application Guideline for Centrifugal Compressor Surge Control System
- 2005: Surge Protection in Centrifugal Compressor Systems
- 2004: Increased Flexibility of Turbo-Compressors in Natural Gas Transmission through Direct Surge Control
- 2004: Transient Gas Flow & Control System Modeling for the Design of Compressor Surge Control Systems for Trips & Upsets
- Thermodynamics
- 2005: Basic Thermodynamics of Reciprocating Compression
- 2004: Basic Thermodynamics of Reciprocating Compression
- Thermography
- 2004: Optimized Compressor Efficiency & Performance Through Thermography
- Torque
- 2004: Speed Variation: A Study on Torque Made and Consumed
- Torsional Analysis
- 2004: Torsional Case Studies on High Speed Separable Reciprocating Compressors
- Torsional Vibration
- 2004: Torsional Vibration: The Value of the Field Verification
- Tracer Gas
- 2004: Basic Engine & Compressor Analysis Techniques
- Troubleshooting
- 2005: Recip Pulsation Vibration Troubleshooting: A Practical Approach
- Turbines
- 2011: Changes in the New 5th Edition of API 616 Specs
- 2011: Quantifying the Effects of Salt and Water on Gas Turbine Inlet Filtration
- 2005: API Specifications Review for Gas Turbine Driven Turbocompressors
- 2005: Emissions Compliance Monitoring Options for Mid-Range Industrial Gas Turbines
- 2004: Gas Turbine Fuel Considerations
- Turbochargers
- 2005: Computerized Method to Optimally Match Retrofit Turbochargers to Upgraded Engines
- 2005: Mitigating Turbocharger Reliability Issues on Caterpillar G3600 Series Engines
- 2005: Turbocharging a Low BMEP Pump Scavenged Engine
- 2004: Turbocharger Reliability Issues on Caterpillar G3600 Series Engines
- Turbocompressors
- 2005: API Specifications Review for Gas Turbine Driven Turbocompressors
- Valve Plates
- 2005: Reciprocating Compressor Valve Plate Life & Performance Analysis
- Valves
- 2005: Application of Elastomeric Materials to Valves in Reciprocating Gas Compressors
- 2005: Reciprocating Compressor Valve Plate Life & Performance Analysis
- 2004: Calculating Reliable Impact Velocity by Mapping Instantaneous Flow in a Reciprocating Compressor
- Vibration
- 2005: Introduction to Vibration & Pulsation in Reciprocating Compressors
- 2005: Lateral & Torsional Vibration Problems in Systems Equipped with Variable Frequency Drives
- 2005: Recip Pulsation Vibration Troubleshooting: A Practical Approach
- 2004: Understanding the Pulsation & Vibration Control Concepts in the New API 618 (Fifth Edition)
- 2004: Vibration & Performance Design Considerations for Multi-Unit Reciprocating Compressor Gas Storage Facilities
